- Aggregates Manager - http://www.aggman.com -
7 Best Practices for Operating Mobile Equipment Near Embankments
Posted By Amanda Bayhi On April 22, 2014 @ 3:58 pm In Aggbeat Online,MSHA Alerts,News,Regulatory | No Comments
The Mine Safety and Health Administration (MSHA)  has released the accident report on a November 7, 2013 fatality at a granite mine.
The incident involved a 46-year-old equipment operator with 27 years of experience who was killed when the haul truck the victim was operating veered off the left side of a haul road, traveled through a berm, went over an embankment and overturned in a settling pond.
MSHA recommends these best practices for operating self-propelled mobile equipment near embankments:
Provide and maintain adequate berms or guardrails on the banks of roadways where a drop-off exists.
Conduct pre-operational checks to identify and correct any defects that may affect the safe operation prior to operating mobile equipment.
Always wear a seat belt when operating self-propelled mobile equipment.
Maintain control of self-propelled mobile equipment while it is in motion.
Operate mobile equipment at speeds consistent with the conditions of roadways, tracks, grades, clearance, visibility, curves, and traffic.
Stay alert while operating mobile equipment.
Ensure traffic rules, signals, and warning signs are posted and obeyed.
The full accident investigation report is not yet available. For more information about this accident, click here .
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/7-best-practices-for-operating-mobile-equipment-near-embankments/
URLs in this post:
 Image: http://www.aggman.com/files/2014/04/Screen-Shot-2014-04-22-at-4.53.29-PM.png
 Mine Safety and Health Administration (MSHA): http://www.msha.gov/
 click here: http://www.aggman.com/files/2014/04/Fab13m15.pdf
Copyright © 2009 Aggregates Manager. All rights reserved.