MICO Offers Hydraulic Apply Caliper Disc Brake
July 2nd, 2012
Company: MICO Incorporated
NORTH MANKATO, Minn. — MICO, Incorporated introduces the 520 Series hydraulic apply caliper disc brake for on and off-highway service braking applications. The fixed caliper type brake uses a modulated hydraulic pressure source, such as a master cylinder, to control brake torque. It can be mounted in a vertical or horizontal position and linings can be replaced without removing the brake.
The brake includes two ductile iron caliper halves that are pressurized by a single inlet port cross-over tube feature, which allows hydraulic pressure to actuate the 2.25-inch diameter piston in each half. The unit provides for continuous duty pressure of 1,000 PSI and intermittent duty pressure of 1,500 PSI. Weighing approximately 17 pounds, the brake requires a minimum disc diameter of 15 inches.
To reduce unnecessary lining wear, the caliper disc brake features a spring-operated lining retractor mechanism that maintains a constant lining-to-rotor disc clearance distance whenever the brake is not applied. The total lining contact area is 12.4 square inches, with a usable lining thickness of 0.32 inches on each side. Linings can be replaced without disassembling or removing the brake, allowing for reduced maintenance time and costs.
Installation of the caliper disc brake is made simple due to the brake’s flexibility to be mounted in either a horizontal or vertical position. The unit can be attached directly to a threaded hanger or clamp.
MICO, Incorporated designs, manufactures and markets brake systems, hydraulic components and controls, primarily for off-road markets. For more information, contact MICO, Incorporated, 1911 Lee Boulevard, North Mankato, MN 56003, call 507-625-6426, fax 507-625-3212, send an e-mail to firstname.lastname@example.org or visit the company’s website at www.mico.com.
Carlisle Industrial Brake and Friction
Manufacturers of Brakes:
The appearance of advertisements and product information on this site does not constitute an endorsement by Aggregates Manager Magazine, and Aggregates Manager Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
SUBSCRIBE & FOLLOW
- Miner suspended upside down pulled to safety by his pant legs659 Views
- Caterpillar lays off hundreds more, announces plant closing in North Carolina361 Views
- Cat 6015B hydraulic shovel offers increased power, more loading capacity336 Views
- Transportation funding extended through Dec. 4 as House and Senate work out long-term bill254 Views
- Obama signs two-week transportation patch into law214 Views