Weir Minerals Linatex launches a powerhouse of hose options
January 19th, 2012
Company: Weir Minerals Linatex
Category: Hoses, Tubing, Connectors
Gallatin, TN – Weir Minerals Linatex, a business unit within The Weir Group PLC, announces the release of two new products and one new product enhancement. These product launches provide Weir Minerals Linatex with a new competitive advantage not enjoyed by other hose manufacturers.
“The introduction of these new hose offerings proves that Weir Minerals Linatex is positioned to be the manufacturing leader in the hand-built hose market. Our products are simply better-performing, and provide advantages not offered by the competition,” says Andrew Philp, VP Comminution Product Marketing at Weir Minerals. “Plus, relative to the competition our products are competitively priced.”
Preformed hose bend
Intended as a replacement for hard walled pipe bends in slurry transfer pipelines, the Linatex® preformed hose bend provides a significant wear life improvement over standard metal pipe, especially when abrasion wear and vibration are issues. The premium Linatex® tube provides long lasting wear resistance in a rubber compound for wet slurry applications. This resilient rubber absorbs the energy from moving slurry and returns to its original form whilst dampening vibrations. Linatex® hose bends are stocked in 4” to 16” IDs in both 45⁰ and 90⁰ 3D radii.
Wear indicator system
The Linatex® wear indicator system provides a solution to many of the traditional issues surrounding the maintenance of hose in highly abrasive environments. It provides 24 hour-a-day monitoring and peace of mind.
By installing the Linatex® wear indicator system you will avoid the need for physical inspections and costly emergency maintenance downtime. Unexpected hose failures that can cause environmental spills, and health and safety incidents, will be substantially reduced.
Unlike other wear indication systems which only check for a break in the wire (continuity) to detect a go/no-go hose failure point, the Linatex® wear indicator system senses a change in resistance as measured by ohms – such precision measurement provides for more accurate results.
The Linatex® wear indicator system is a revolutionary early warning system for hose that handles highly abrasive materials.
Linatex® cut end hose and couplings
Weir Minerals Linatex has enhanced its previous cut end hose by increasing the standard working pressure to 150 PSI. Weir Minerals Linatex has also established a new coupling vendor to provide better aesthetics and performance in its reusable lightweight aluminium flanged couplings.
The Linatex® cut end hose system continues to provide an exceptionally abrasion resistant slurry hose designed to provide fast and easy on-site assembly, minimizing downtime and maintenance costs.
For more information about the Linatex® cut end hose system, preformed hose bend, and wear indicator system, visit: www.weirminerals.com
All Hoses, Tubing, Connectors:
Weir Minerals Linatex
Manufacturers of Hoses, Tubing, Connectors:
- CEJN Industrial Corporation
- Costex Tractor Parts
- Dana Corporation
- Deetag Ltd
- Diesel Parts of America
- Eaton Aeroquip
- Eaton Hydraulics Inc
- G and G Manufacturing Company
- Haltec Corporation
- Hatec Inc
- HydrauliCircuit Technology Inc
- Parker Hannifin Corporation
- Plymouth Tube Company
- Rapid Reel
- Snap-tite Inc
- Tuthill Drive Systems
The appearance of advertisements and product information on this site does not constitute an endorsement by Aggregates Manager Magazine, and Aggregates Manager Magazine has not investigated the claims made by any advertiser. Product information is based solely on material received from suppliers.
SUBSCRIBE & FOLLOW
- Worker airlifted to hospital after accident with rock crusher526 Views
- Cat rolls out its 6020B hydraulic shovel, matches 777G haul trucks364 Views
- Unexpected sand and gravel causes rollover accident344 Views
- Buffalo Crushed Stone cited for pollution174 Views
- Eliminate the fat and increase profits through lean processing165 Views