Attachments add versatility to your mobile equipment fleet

Amy Materson

October 8, 2015

SupplyLines_CMSBanner

COUPLERS

TRKCoupler_MG1
Low-hassle, low-cost alternative to hydraulic couplers

Change attachments without having to hammer out and change the pin with the Manual Multi-Grab Quick Coupler from TRK. An adjustable screw mechanism allows the operator to grab multiple pin centers, and the difference in speed when changing attachments is minimal when compared to a hydraulic coupler. With no plumbing or hydraulic maintenance, initial and ongoing costs are lower.

TRK | www.trkattach.ca

Coupler features fewer moving parts

The Case Construction Equipment 721F wheel loader meets Tier 4 Final emission standards. It is equipped with a selective catalytic reduction (SCR) solution that treats emissions separately with Diesel Exhaust Fluid (DEF) and does not require the engine to re-circulate exhaust gas. This is said to improve fuel efficiency by up to 20 percent, lower exhaust temperatures, and provide excellent throttle response and simplified maintenance without sacrificing power. It also requires no DPF regeneration or maintenance. Powered by a 6.7-liter engine, it produces 179 net rated horsepower. It is available with tool carrier or extended reach linkage and in specialty configurations.

Wedgelock | www.wedgelockna.com

BREAKERS

Tie-rod free breakers simplify maintenance

The Case Construction Equipment 721F wheel loader meets Tier 4 Final emission standards. It is equipped with a selective catalytic reduction (SCR) solution that treats emissions separately with Diesel Exhaust Fluid (DEF) and does not require the engine to re-circulate exhaust gas. This is said to improve fuel efficiency by up to 20 percent, lower exhaust temperatures, and provide excellent throttle response and simplified maintenance without sacrificing power. It also requires no DPF regeneration or maintenance. Powered by a 6.7-liter engine, it produces 179 net rated horsepower. It is available with tool carrier or extended reach linkage and in specialty configurations.

Allied Construction Products | www.AlliedCP.com


Hydraulic breaker maximizes efficiency

Bobcat’s hydraulic breaker attachment, which quickly mounts to the carrier machine via the Bob-Tach and X-Change mounting systems, delivers maximum efficiency by matching the hydraulic capacity of the carrier to the breaker, allowing consistent machine-to-breaker performance. Suitable for a range of demolition jobs, the breaker is available in models ranging from 60 to 1,000 foot-pound impact energy classes.

Bobcat | www.bobcat.com


Specialized working end fits range of breakers

Choose from a wide array of demolition tools with Brunner and Lay’s product line, which includes conical point, pyramid point, x type point, chisel, grooved chisel, wide chisel, blunt, super blunt, elephant’s foot, driving tool, and detachable shanks and pads. Suitable for most types of heavy-duty, boom-mounted breaker machines, the tools are manufactured from high quality steel, which is heat-treated for hardness, impact strength, and durability.

Brunner and Lay | www.brunnerlay.com


Breaker delivers power in demanding conditionss

Montabert’s V65 heavy-range hydraulic breaker features a unique automatic speed variation system, adjusting its impact energy and striking rate to match material hardness in excavation and quarrying applications. Designed for use on excavators weighing between 121,250 and 198,400 pounds, the 12,324-pound hydraulic breaker delivers between 380 and 950 blows per minute. Standard features include a progressive start system that sets the tool into the material prior to the delivery of higher energy, a blank-fire protection system that reduces harmful metal-to-metal contact, and an energy recovery system that recycles recoil energy to increase strike power.

Montabert | www.montabert.com


Screener crusher bucket handles 6-inch material

Screen, crush, pulverize, aerate, blend, mix, separate, feed, and load materials all in one stage with Allu’s D-Series Screener Crusher Bucket attachment, designed for wheel loaders, excavators, and skid steers. The bucket has a power adjustment valve for powerful startup and rotation, which enables the attachment to screen and crush wet or dry material from 0.60- to 6-inch fragment sizes. Straight side plate construction ensures the bucket is easy to fill and holds a greater volume of material. Sixty models are available.

Allu | www.allu.net


Pulverizes stone quickly

Quickly pulverize asphalt, concrete, and stone with Atlas Copco’s compact bucket crushers, which eliminate the need for additional crushing equipment. Designed for a long service life, the bucket crushers have replaceable top and bottom jaws, and single jaws that can be rotated. Four models are available, with diameters ranging from 0.5 to 4.75 inches.

Atlas Copco | www.atlascopco.us

BUCKETS


Heavy-duty bucket is double reinforced for strength

Handle heaped capacities of up to 30 cubic feet with Berlon Industries’ heavy-duty extended lip skid-steer bucket. Built with quarter-inch steel and fitted with a heavy-duty dimple plate, Berlon says the floor is five times stronger than floors with wear bars under the bucket. A fully welded body enhances structure strength and features double reinforcement in critical areas. The bucket is 23 1/2 inches tall, 36 inches deep, and is available in widths of 72, 28, 24, and 90 inches. Heaped capacities range between 24 and 30 cubic feet.

Berlon Industries | www.berlon.com


Move more material with ditching bucket

Efficiently complete a range of excavating projects with Doosan’s heavy-duty ditching buckets. Designed for Doosan crawler excavators ranging from the DX140LC-3 through the DX530LC-5, the buckets feature a deep profile to improve operation when loading material, backfilling, and working on slopes. With no internal gussets, the bucket has a greater capacity for moving more material per cycle.

Doosan | www.doosanequipment.com


Simplify material sorting

Perform on-site material sorting with Esco’s Sifter Bucket. The bucket features Esco’s Ultralok tooth system with an integrated hammerless lock that provides safe, easy tooth replacement. The Sifter Bucket is composed of premium materials to boost reliability.

Esco | www.escocorp.com

MACHINE ENHANCEMENTS


Grade control eliminates guesswork

Take the guesswork out of digging with ExcaVision, which provides grade control for excavators, backhoes, dozers, scrapers, and graders. With accuracy up to 0.02 feet, no re-checking or redoing work is necessary. The latest version of the DozerVision software allows the operator to monitor both absolute and relative lateral slope of the blade.

ExcaVision | www.ExcaVision.com


Teeth install without tools

H & L Tooth’s top-locking teeth are designed for backhoes that use side flexpin teeth and shanks, including Case, Deere, JCB, and more. The teeth install without tools and can be removed with either a prybar or punch. Designed to fit existing shanks, there are no flexpin hassles with the top-locking teeth. Available in self-sharpening single, twin, and triple penetrator dirt, fang, and flare styles, the starter kit contains five teeth and all components.

H&L Tooth | www.hltooth.com


Belting increases track life

McLaren Industries’ NextGen TDF series of track loader rubber tracks has SpoolRite belting technology, a proprietary system that increases the tensile strength of the tracks’ internal structure to handle tough workloads. The pre-stressed, aligned, non-overlapping continuous belting system ensures equal tension throughout the belt, and a Crack and Cut Quarantine System uses a multiple lug profile to contain the growth of cut and cracks.

McLaren Industries | www.mclarenindustries.com


Extend the boom without a counterweight

Increase your excavator’s reach with the Extendavator from Paul Wever Construction Equipment, which is available in lengths from 4 to 50 feet. The attachment is rated at full reach with a full bucket, requiring no extra counterweight. The Extendavator installs in two hours with no additional hydraulic valves and is transportable with the excavator. Available in six weight classes, the Extendavator can also be custom designed upon request.

Paul Wever Construction Equipment | www.pwce.com


Teeth handle even hard rock

Get back to work faster with Pengo’s Strata Conical Teeth, which enable efficient drilling and provide extended intervals between tooth change-outs. The Strata Series has a drilling grade carbide tip to boost effectiveness in hard-rock drilling applications. The Strata teeth are available in five sizes: 0.74 shank, .076 shank, 1-inch shank, 1.16-inch shank, and step shank.

Pengo | www.pengoattachments.com

There is one comment

Your email address will not be published. Required fields are marked *