- Aggregates Manager - http://www.aggman.com -
Buell 75 TPH Transportable Classifier System
Posted By cprewitt On November 20, 2009 @ 8:40 am In Aggregates Zone | No Comments
The New Buell 75 TPH Transportable Classifier System uses a dry process for removal of minus 200 mesh material to produce an in spec manufactured sand product. The fact that this is a dry process provides the possible additional benefit that the fines can be sold as a second product such as mineral filler. A key factor in the classifier that makes it unique is the fact that there are no moving parts, which basically reduces the requirement to the minimum for maintenance as compared to other classifier systems. The system has an inlet feed rate of 75 TPH and operates at an air flow rate of 14,400 ACFM, which is provided by a clean air fan that is located down stream of the filter which collects the fines material. The system only requires 120 total horsepower and a control cabinet is included. The system has ceramic liners in some areas to provide wear resistance for abrasive materials. The system can be transported with no escort required and can be set up in one day. Buell classifiers can be rented or purchased to provide a transportable solution for your classification needs and to learn more go to www.buellclassifier.com  or call 717 274 7303.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/buell-75-tph-transportable-classifier-system/
URLs in this post:
 www.buellclassifier.com: http://www.buellclassifier.com/
Copyright © 2009 Aggregates Manager. All rights reserved.