December 2009 – RollOuts
by Kerry Clines, Senior Editor
Hybrid excavators come to North America
Komatsu America Corp. says its new hybrid PC200LC-8 excavator is the first to enter the North American market. The 20- to 22-ton machine provides 138 horsepower, has an operating weight of 43,643 to 47,260 pounds, and features a 0.66- to 1.57-cubic yard bucket capacity.
The excavator uses a newly developed electric swing motor, power generator motor, capacitor, and diesel engine. The hybrid system works on the principle of swing energy regeneration and energy storage. The kinetic energy generated during the swing braking phase is converted to electricity, which is sent through an inverter and then captured by the capacitor. The captured energy is then discharged quickly for upper structure rotation and to assist the engine when accelerating under work load conditions.
In tests comparing the hybrid to Komatsu’s standard excavator, the company said the hybrid model reduced fuel consumption by approximately 25 to 40 percent, depending on the application.
Portable, high-output crusher
Eagle Crusher Co. says its new 1200-25 CV portable crushing plant, with the UltraMax II 4747 Impactor, accepts large feed sizes and is suitable for high-volume primary and secondary crushing. The crusher’s impactor includes a solid-steel, three-bar rotor for efficient crushing of limestone, shot rock, concrete, asphalt, and sand and gravel with a reduction ratio up to 24:1. The open-circuit crushing plant is designed to have efficient weight distribution for easy transport. The crusher is equipped with a heavy-duty, steel-reinforced 17-cubic yard feed hopper that accepts material from 5-yard loader buckets or excavators.
High-frequency portable screen with bin
TCI Manufacturing says its new portable screening plant and bin (PSB) allows quick, portable, self-contained set-up and has the capacity to power three auxiliary conveyors. The PSB consists of an 8- by 14-foot feed hopper with a remote, hydraulic-control door and hydraulic grizzly; a 36-inch by 18-foot, roller-belt feed conveyor underneath the hopper; a 36-inch by 41-foot channel frame feed conveyor; a 6- by 12-foot, double-deck ultra frequency screen; 24-inch by 16-foot cross conveyors for products; and a 30-inch by 17-foot rear-discharge channel frame conveyor for fines.
Returns materials to main stream
Martin Engineering’s new Martin Carryback Capture System is designed to minimize problems with fugitive material by transferring belt cleaning residue back into the material stream. The system stands just 13 inches high, allowing it to fit into tight spaces under conveyors or in low overhead conditions. It uses an electrically driven hydraulic cylinder to push a steel cleaning blade across the system’s collecting pan, sliding the slop and fines in the trough toward the conveyor discharge. The cleaning cycle of each unit automatically adjusts to match the belt speed of the main conveyor.
Object detection system
Caterpillar has enhanced mine safety with the introduction of its new Cat Integrated Object Detection System. The system combines cameras, radar, and alarms to notify the operator when an object is close to the machine, but not in the operator’s field of vision. The system monitors and shows the operator the areas immediately around the truck. Radar information is processed by an on-board, touch-screen display, and the cameras allow the operator to identify what the radar detects. Three alarm levels indicate the proximity of an object or the urgency of taking action to avoid an object. The system is wholly contained on the machine and is scalable, allowing operators to start with just cameras and add radar later.
Heavy-duty screening machine
Powerscreen introduced its new Warrior 800, a multi-purpose, heavy-duty incline, two-deck screen capable of stockpiling, three-way splitting, or scalping before and after crushing units. The screenbox accepts a wide variety of screen media. The unit accepts material feed up to 16 inches and can handle up to 300 tons per hour. Features include a low-profile feed hopper with rear door for direct feed without benching and a two-deck screen box measuring 9 feet by 4 feet. A new electrical control system allows operators to monitor and diagnose the machine on site via an LCD display without specialty tools. The machine is available in tracked or wheeled configurations.
Portable, powerful superstacker
KPI-JCI, an Astec company, says its 48-inch by 150-foot SuperStacker is the largest road-portable telescoping conveyor on the market and is the quickest and easiest to pack up and move. The stacker’s Wizard Touch Automated Control System helps keep stockpiling operations efficient. Additional features include desegregated stockpiling for no re-blending and less discounting, an automatic discharge height adjustment to help lower degradation, and a heavy-duty undercarriage for highway travel.
World’s largest scraper
K-Tec Earthmovers Inc. says its 1254 articulating dump truck (ADT) is the world’s largest earthmoving scraper available today, featuring a 54-cubic yard heaped capacity and empty tare weight of 49,000 pounds. The scraper’s side walls are 2 feet higher than the K-Tec 1243 ADT, allowing it to hold 11 additional yards. A large target area makes the machine easy to load.
From our partners
The new Sandvik Ranger surface drill rig offers renowned drilling efficiency with up to 20% lower fuel consumption
Known to many by their former name, Ranger, Sandvik’s DX series surface top hammer drill rigs all feature a revolving…
MORE FROM Articles
SUBSCRIBE & FOLLOW
- PHOTOS: Reclamation photo contest entries showcase post-mining opportunities445 Views
- Loader operator dies after sand avalanche at Massachusetts sand and gravel company410 Views
- A total of 27 states have sued the Obama administration over the new EPA water rule377 Views
- The final Waters of the U.S. rule has been released to the Federal Register374 Views
- Location is key for Dolese Bros. Co.'s Davis Quarry366 Views