- Aggregates Manager - http://www.aggman.com -

Deere’s loader follows emissions rules

Posted By Lauren Heartsill Dowdle On September 9, 2010 @ 7:41 am In Manufacturers News | No Comments

[1]

Contracting firm J.H. Reid, South Plainfield, New Jersey, takes delivery of the first John Deere 744K IT4 wheel loader.

When New Jersey Contracting Firm J.H. Reid wanted a wheel loader to allow it to work in Brooklyn, New York, under current and future emissions rules, John Deere found a solution: the new 304-horsepower 744K 4WD loader.

Deere’s new loader is the construction industry’s first IT4-certified iron with more than 175 horsepower. Reid took delivery in late August and immediately put the loader to work on a $125-million, pre-cast bridge job for the New Jersey DOT in Highlands. The loader will head to Brooklyn later this month.

The 744K’s 9.0-L IT4 diesel engine uses cooled exhausted gas recirculation technology to meet emissions regulations, while producing the same torque as a 744K equipped with a Tier 3 engine.


Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/deere%e2%80%99s-loader-follows-emissions-rules/

URLs in this post:

[1] Image: http://www.equipmentworld.com/files/2010/09/LB00010631.jpg

Copyright © 2009 Aggregates Manager. All rights reserved.