- Aggregates Manager - http://www.aggman.com -
Doosan: Designed to handle large material
Posted By Tina Grady Barbaccia On September 18, 2011 @ 5:10 pm In Articles | No Comments
Doosan Infracore Portable Power says its 335-horsepower DL500 wheel loader is designed for handling large material with buckets ranging in size from 5.9 to 6.8 cubic yards. A Z-bar lifting system provides bucket breakout force of 61,373 pounds.
Two working modes — standard and economy — allow the operator to maximize production or minimize fuel consumption. Features include a full powershift transmission; four forward speeds ranging from 3.9 to 21.7 miles per hour; and three reverse speeds ranging from 3.9 to 15.2 miles per hour. The wheel loader has a static tipping load of 50,387 pounds at maximum reach with a straight frame and 43,810 pounds at the maximum steering angle of 40 degrees. Dump height with the 6.8-cubic-yard bucket is 10 feet, 9 inches; dump reach is 4 feet, 3 inches. Height at the bucket pivot point is 15 feet, 1 inch.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/doosan-designed-to-handle-large-material/
URLs in this post:
 Image: http://www.aggman.com/files/2011/09/RO54-Doosan.jpg
Copyright © 2009 Aggregates Manager. All rights reserved.