Doosan: Breaker frequency to match ground conditions
Delivering up to 600 blows per minute, the 5,400-pound DXB260H is designed for use with excavators in the 27-to-37-metric-ton weight range, specifically the Doosan DX300LC and DX350LC. Rated in the 8,000 ft.-lb. impact energy class, the DXB260H requires a hydraulic flow rate of between 39.5 and 63.5 gallons per minute.
With two speeds, the DXB260H breaker frequency can be easily adjusted between short and long stroke settings. This allows the operator to match the breaker frequency to the ground conditions for optimized productivity.
Standard features include a cradle-mounted grease station and blank fire protection. The cradle-mounted grease station delivers continuous grease flow, reducing bushing and tool wear while minimizing maintenance costs and downtime. Blank fire protection uses a cushion of oil at the base of the cylinder to reduce metal-to-metal contact.
The breaker’s suspension system extends excavator workgroup life by absorbing harmful vibrations and stress waves. Also, a patented main valve design reduces hydraulic pressure peaks that can reduce pump life, crack excavator workgroup welds and cause system overheating. Finally, an energy recovery system on the DXB260H increases strike power by using energy generated by piston rebound.
The DXB260H breaker comes with a mounting cap, auxiliary hydraulic hoses, cradle-mounted greaser, two moil points, toolbox and a nitrogen checking device. A one-year warranty is standard.
In addition to the general purpose moil, tools available for the DXB260H include a blunt tool, a chisel and a pyramidal or “nail” tool.
MORE FROM Aggregates Zone
SUBSCRIBE & FOLLOW
- Obama proposes $10-per-barrel tax on oil production752 Views
- Rock and Bowl: Graniterock helps make the Super Bowl a success620 Views
- Obama says now is time to raise gas tax with oil prices plummeting456 Views
- Aggregates industry leader Bob Bartlett dies432 Views
- MSHA's top 25 most cited standards at sand and gravel facilities in 2015334 Views