- Aggregates Manager - http://www.aggman.com -

Doosan’s DL200TC tool carrier with parallel-lift linkage system

Posted By Kerry Clines On June 10, 2011 @ 9:40 am In Featured Products,Trade Show Coverage | No Comments

[1]The Doosan DL200TC tool carrier with parallel-lift linkage system keeps the work tool flat as it is lifted, an advantage when loads need to stay level. Built around a Tier 3-compliant, 143-horsepower, six-cylinder Doosan diesel engine, the machine has an operating weight of 25,708 pounds with a standard 2.6-cubic-yard bucket; dump height is 8 feet, 11 inches; and dump reach is 3 feet, 1 inch. Bucket breakout force is 23,149 pounds with a pin-on bucket. Static tipping load is 18,913 pounds with a straight frame and 16,272 pounds at the maximum steering angle of 40 degrees. Four forward speeds range from 4.1 to 21.7 miles per hour; three reverse speeds range from 4.5 to 15.5 miles per hour.

Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/doosans-dl200tc-tool-carrier-with-parallel-lift-linkage-system/

URLs in this post:

[1] Image: http://www.aggman.com/files/2011/06/RO74-Doosan-DL200TC.jpg

Copyright © 2009 Aggregates Manager. All rights reserved.