- Aggregates Manager - http://www.aggman.com -
Doosan’s DL500 wheel loader designed to handle large material
Posted By Kerry Clines On September 9, 2011 @ 3:11 pm In Featured Products | No Comments
Doosan says its 335-horsepower DL500 wheel loader is designed for handling large material with buckets ranging in size from 5.9 to 6.8 cubic yards. A Z-bar lifting system provides bucket breakout force of 61,373 pounds. Two working modes — Standard and Economy — allow the operator to maximize production or minimize fuel consumption. Features include a full powershift transmission; four forward speeds ranging from 3.9 to 21.7 miles per hour; and three reverse speeds ranging from 3.9 to 15.2 miles per hour. The wheel loader has a static tipping load of 50,387 pounds at maximum reach with a straight frame and 43,810 pounds at the maximum steering angle of 40 degrees. Dump height with the 6.8-cubic-yard bucket is 10 feet, 9 inches; dump reach is 4 feet, 3 inches. Height at the bucket pivot point is 15 feet, 1 inch.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/doosans-dl500-wheel-loader-designed-to-handle-large-material/
URLs in this post:
 Image: http://www.aggman.com/files/2011/09/RO51-Doosan2.jpg
Copyright © 2009 Aggregates Manager. All rights reserved.