D10T Track-Type Tractor

aggmanstaff

November 15, 2007

The rugged, easy-to-service Caterpillar C27 engine with ACERT® Technology is electronically controlled. Twin turbochargers and air-to-air aftercooling provides high horsepower while keeping exhaust temperatures cool.


 


 


 






































































































































































































































































































































































































































































Engine

Units:  US


Engine Model


Cat® C27 ACERT



Flywheel Power


580 hp



Gross Power


646 hp



Net Power – Caterpillar


580 hp



Net Power – SAE J1349


574 hp



Net Power – EU 80/1269


580 hp



Net Power – DIN 70020


601 PS



Net Power – ISO 1585


580 hp



Bore


5.4 in



Stroke


6 in



Displacement


1647.5 in3




Weights



Operating Weight


146500 lb



Shipping Weight


106400 lb




Undercarriage



Shoe Type


Extreme Service



Width of Shoe


24 in



Shoes/Side


44



Grouser Height


3.7 in



Pitch


10.2 in



Ground Clearance


24 in



Track Gauge


100 in



Length of Track on Ground


12.75 ft



Ground Contact Area


7326 in2




Transmission



1 Forward


2.5 mph



2 Forward


4.5 mph



3 Forward


7.9 mph



1 Reverse


3.2 mph



2 Reverse


5.6 mph



3 Reverse


9.8 mph




Service Refill Capacities



Fuel Tank


318 gal



Cooling System


34.9 gal



Engine Crankcase*


18 gal



Power Train


51 gal



Final Drives (each)


6 gal



Roller Frames (each)


23.8 gal



Pivot Shaft Compartment


8 gal




Hydraulic Controls



Pump Type


Gear Driven



Lift Cylinder Flow


107 gal/min



Tilt Cylinder Flow


30 gal/min



Bulldozer Relief Valve Setting


2725 psi



Tilt Cylinder Relief Valve Setting


2950 psi



Ripper (Lift) Relief Valve Setting


2725 psi



Ripper (Pitch) Relief Valve Setting


2725 psi



Tank Capacity


38 gal




Winches



Winch Model


Consult your Caterpillar Dealer for installation arrangements.




Track Roller Frame



Oscillation


13.8 in




Rippers



Maximum Penetration Force (shank vertical)


45980 lb



Pry out Force


93360 lb



Total Operating Weight* (with SU-Blade and Ripper)


146400 lb



Maximum Penetration Force (shank vertical)


45980 lb



Pry out Force (Multi-Shank Ripper with one tooth)


93360 lb



Additional Shank


1160 lb



Total Operating Weight* (with SU-Blade and Ripper)


148277 lb




Dimensions



Ground Clearance


24 in



Track Gauge


100 in



Width without Trunnions (Standard Shoe)


10.4 ft



Height (Stripped Top)


10.6 ft



Height (FOPS Cab)


13.4 ft



Height (Top of Stack)


14.9 ft



Drawbar Height (Center of Clevis)


31 in



Length of Track on Ground


152 in



Overall Length Basic Tractor


17.5 ft



Length with Single-Shank Ripper


23.3 ft



Length with Multi-Shank Ripper


23.1 ft



Overall Length (SU-Blade/SS Ripper)


30.4 ft

There are no comments

Your email address will not be published. Required fields are marked *