Introducing StacoVAR Fixed Capacitors for Low Voltage Power Factor Correction
Staco Energy Products introduces its second generation of StacoVAR fixed capacitors for power factor correction and harmonic compensation. These standard units are available from 2.5kVAR to 400 kVAR as economical, fixed motor load (ML) type capacitor assemblies. Equipped with fusing and blown-fuse indicator lights as standard, StacoVAR fixed capacitor assemblies are idea for indoor or outdoor use with voltages from 240Vac to 600 Vac. These complete assemblies are UL 508A listed, c-UL, and available from stock or with fast delivery times. They are ideal for improving power factor where induction motors are located, including manufacturing facilities, food and beverage processing, warehousing and distribution centers, water and wastewater treatment plants, and more.
These metalized polypropylene capacitors are self-healing to prevent permanent dielectric breakdown. Each capacitor is designed for a long service life over a wide temperature range. They withstand the most demanding conditions, including harmonics of up to 10% THD. Pressure sensitive circuit interruption within the capacitor allows the units to be safely removed from service under heavy fault conditions while maintaining case integrity. External discharge resistors allow voltage to be reduced to 50 volts or less in one minute.
StacoVAR ML capacitors are housed in a rugged metal enclosure and include a terminal type power line connection for quick, simple installation. Available enclosures include NEMA 1, 12, or 3R ratings. They can be mounted either vertically or horizontally to meet a variety of application needs. Current limiting fuses are rated at 165% of the rated current. Three blown fuse indicator lights provide illumination for fuse replacement.
“Customers using StacoVAR fixed capacitors see immediate improvement in their power factor” says Chuck Gougler, Marketing Manager. “These units are packed with features that enhance their functionality and make them easy to install.”
Staco Energy Products Company manufactures voltage control, VAR compensation, uninterruptible power supplies and engineered power quality solutions. For more than seventy years, customers worldwide have relied on Staco as their dependable source for standard and tailored solutions to a wide range of electrical power problems. Headquartered in Dayton, Ohio, Staco Energy Products is a wholly owned subsidiary of Component Corporation of America, located in Dallas, Texas. For more information, visit www.stacoenergy.com, call 866-266-1191, write to Staco Energy Products Company, 301 Gaddis Blvd, Dayton, OH 45403, or e-mail to email@example.com.
From our partners
The new Sandvik Ranger surface drill rig offers renowned drilling efficiency with up to 20% lower fuel consumption
Known to many by their former name, Ranger, Sandvik’s DX series surface…
MORE FROM Aggregates Zone
SUBSCRIBE & FOLLOW
- Legislation stopping proposed Waters of the U.S. rule passes Transportation and Infrastructure committee with bipartisan support179 Views
- Bipartisan highway bill would tie federal gas tax to inflation, create transportation commission177 Views
- Eagle Scout project rebuilds DeSoto State Park hiking trail from stone found in old quarry at park164 Views
- Lafarge and Holcim announce U.S. asset divestments required by Federal Trade Commission for merger148 Views
- NSSGA wants everyone to ask their representative to co-sponsor the Regulatory Integrity Protection Act (H.R. 1732) to stop proposed Waters of the U.S. rule129 Views