- Aggregates Manager - http://www.aggman.com -

Komatsu showcases intelligent dozers at ConExpo-Con/Agg

Posted By Therese Dunphy On March 5, 2014 @ 4:46 pm In Aggbeat Online,ConExpo-Con/Agg 2014,Equipment,News,RollOuts | No Comments

D37PXi-23 [1]

D37PXi-23

Two more dozers join Komatsu America Corp.’s [2] Intelligent Machine Control family, the D37EXi/PXi-23 and D39EXi/PXi-23 crawler dozers.

Click image for more show coverage [3]

Click image for more show coverage

Equipped with fully automatic blade control, both machines can perform not only finish grading, but also rough dozing. Customer selectable dozing modes allow system response to be tailored to the current machine operation for optimized performance, while blade load settings are adjustable between pre-sets to match actual conditions.

Add-on machine control systems have been replaced with factory-installed cab top GNSS (global navigation satellite system) antenna enhanced inertial measuring unit, and stroke-sensing cylinders. As a result, an improvement in combination rough dozing efficiency of up to 9 percent can be achieved.

Weighing in at 18,872 to 21,848 pounds, depending on configuration and model.

The Tier 4i engines use smart engine technology, with operator-specific features bundled into the compact 89 horsepower (D37i-23) and 105 horsepower (D39i-23) packages.

 


Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/komatsu-showcases-intelligent-dozers-at-conexpo-conagg/

URLs in this post:

[1] Image: http://www.aggman.com/files/2014/03/D37PXi-23.jpg

[2] Komatsu America Corp.’s: http://www.komatsuamerica.com

[3] Image: http://www.aggman.com/category/conexpo-conagg-2014/ceca-2014

Copyright © 2009 Aggregates Manager. All rights reserved.