MICO S12 Series Electrohydraulic Brake Valve Provides Triple the Flow Capacity

aggmanstaff

November 30, -0001

NORTH MANKATO, Minn. — MICO, Incorporated announces the release of the S12 Series Electrohydraulic Brake Valve (EBV), which provides more than triple the flow capacity of a traditional EBV. In large, spring-applied, hydraulic release brake applications, it has been able to replace two standard electrohydraulic brake valves operating in parallel or an EBV and relay valve. This lowers cost and improves system reliability. 


 


The S12 series uses the MICO patented auto-relieving feature to get more travel and flow capacity out of the proportional solenoid valve. The brake valve reliably handles high flows without the complexity and orifices associated with pilot-operated fluid power valves. Instead of using a pilot valve, with its associated high leakage and contamination sensitivity, a high force solenoid is combined with a precision fit spool and housing to maximize contaminant resistance and minimize leakage.


 


The successful cross-hole metering set-up of the standard MICO electrohydraulic brake valve also is used in the S12 Series EBV. The S12 incorporates a longer spool to incorporate a second flow path — which runs parallel to the standard path — giving the new series a higher flow capacity from brake to tank. These features make the valve ideal for spring-applied, hydraulic release brake applications requiring high flows such as those found on vehicles with large displacement brakes.


 


All MICO EBVs are developed specifically for full power brake systems. These applications require rapid and controllable filling, or emptying, of single-acting actuators, and modulating pressure without consuming significant pilot flow from the accumulators used to store energy during power-off” braking.


 


The S12 series rounds out a complete line of MICO EBVs — handling larger systems than previous EBV designs. The EBV-M is prevalent in hydraulic-applied, spring-release brake applications; the EBV-S works with spring-applied, hydraulically released brakes; and the EBV-A is used to add ABS to full-power brake systems.


 


MICO, Incorporated works closely with customers to develop and test products for a huge variety of brake applications. Custom EBV designs and prototypes can typically be created within a few weeks. To ensure success, entire brake systems can be configured and tested within the MICO engineering lab prior to implementation on a prototype machine.


 

MICO, Incorporated designs, manufactures and markets brake systems, hydraulic components and controls, primarily for off-road markets. For more information, contact MICO, Incorporated, 1911 Lee Boulevard, North Mankato, MN 56003, call 507-625-6426, fax 507-625-3212, send an e-mail to micomail@mico.com or visit the company™s Web site at www.mico.com

There are no comments

Your email address will not be published. Required fields are marked *