- Aggregates Manager - http://www.aggman.com -

VIDEO: Midwestern Industries rolls out new MR-7 double-deck screener

Posted By Amanda Bayhi On March 8, 2014 @ 9:02 pm In Aggbeat Online,ConExpo-Con/Agg 2014,Equipment,News,RollOuts | No Comments

IMG_4495 [1]

Midwestern Industries [2] introduced its MR-7 double-deck screener at ConExpo-Con/Agg 2014 in Las Vegas.

Click image for more show coverage [3]

Click image for more show coverage

Designed for conveyor installations, the 4-foot by 7-foot unit has a 1-inch opening on the top deck and a 1/8-inch opening on the bottom screening deck, and can be combined with end-tension screen panels that are supported by crossbars. The company says are used to full capacity to eliminate dead areas.

Chip Painter, vice president of manufacturing for Midwestern Industries, talked about the MR-7 at the company’s booth at the show. Painter said the panels are easy to change.

“They’re quick, easy to change – change screens in about 15 minutes,” Painter said.



The screener can hang at the end of a conveyor of be placed on a pedestal. It is made from stainless steel or carbon steel with corrosion-resistant coatings, and Midwestern says the unit can be outfitted with a variety of screens for different applications.

Features include a 2-horsepower, 230/460-volt, 3-Phase, 60-cycle, 1750-rpm motor; V-drive components; and belt guard and conveyor installation carriage members.

The screen is available in impact-resistant high carbon wire, abrasion resistant oil tempered wire or stainless steel.

Watch the included video to hear Painter talk about the product release at ConExpo-Con/Agg 2014.


Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/midwestern-mr-7/

URLs in this post:

[1] Image: http://www.aggman.com/files/2014/03/IMG_4495.jpg

[2] Midwestern Industries: https://www.midwesternind.com

[3] Image: http://www.aggman.com/category/conexpo-conagg-2014/ceca-2014

Copyright © 2009 Aggregates Manager. All rights reserved.