- Aggregates Manager - http://www.aggman.com -

MSHA reports fatality at Utah sand and gravel facility

Posted By Tina Grady Barbaccia On April 20, 2011 @ 9:17 am In Aggbeat Online | No Comments

A 56-year-old equipment operator with 10 years of experience was killed on Feb. 24, 2011, Bolinder Resources LLC – Crushing and Sampling Unit, a Utah sand and gravel operation, the Mine Safety and Health Administration (MSHA) announced on April 11.

The operator was cleaning a tramp metal magnet on a belt conveyor when it started.

MSHA has provided the following best practices to protect against this type of accident in the future:

  • Establish policies and procedures for conducting specific tasks on belt conveyors.
  • Ensure that persons are task trained and understand the hazards associated with the work being performed.
  • De-energize and block belt conveyors against motion before working near a drive, head, tail, take-up pulleys, and magnets.
  • Lock-out/tag-out all power sources before working on belt conveyors.
  • Maintain communications with all persons performing the task. Before starting belt conveyors, ensure that all persons are clear.
  • Provide and maintain a safe means of access to all working places.
  • Sound an audible alarm if the entire length of the belt conveyor is not visible from the starting switch.

Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/msha-reports-falatility-at-utah-sand-and-gravel-facility/

Copyright © 2009 Aggregates Manager. All rights reserved.