- Aggregates Manager - http://www.aggman.com -
October 2009 – RollOuts
Posted By Therese Dunphy On October 1, 2009 @ 12:06 pm In Articles,Departments,RollOuts | No Comments
by Kerry Clines , Senior Editor
Dozer for mining, heavy construction
Komatsu America Corp. says its new D375A-6 crawler dozer for use in mining and heavy construction was designed following customer input and feedback, and includes technological enhancements for increased productivity. The dozer is powered by a Komatsu SAA6D170E-5 engine with an operating weight of 157,940 pounds.
According to the company, new features and upgrades include:
Affordable, aftermarket hydraulic system
FLSmidth Excel LLC says it new Sentinel Advanced Hydraulic System is an affordable, aftermarket solution for aggregate producers who want to automate their cone crusher’s clearing capabilities without the purchase of a new crusher. The system provides constant clamping force between the adjustment ring and the mainframe, reducing “ring-bounce” and the related maintenance and repair costs. A remote power unit provides cavity clearing with the turn of a switch and the push of a button. The company says the system’s tramp release cylinders require little or no modification to the existing cone frame during installation, and feature protective boots to minimize potential damage and dust contamination.
Atlas Copco says its new lightweight, QLT 4 light tower has four 1,000-watt metal halide lamps and enhanced flicker-free lighting with 15 to 20 percent more efficiency. The mast extends up vertically to 31 feet and rotates 360 degrees. Other features include a runtime hour indicator, lockable enclosure, shutdown protection for low oil and high temperature, and a starting battery.
Aerodyne’s “S” Series Dust Collector uses centrifugal force to separate out fine particles beginning at 20 microns. The collector can handle dry particles such as fly ash and sand, as well as fibrous, sticky, hygroscopic, and high-temperature materials that tend to clog or damage filter bags or cartridges. According to the company, the unit’s design ensures that a minimal amount of dust particulate will come in contact with the collector walls. The dust collector can be installed vertically or horizontally.
Engine meets Interim Tier 4 regs
John Deere says it plans to use cooled exhaust gas recirculation (EGR) engines with exhaust filters consisting of a diesel oxidation catalyst/diesel particulate filter in its construction equipment to meet the 2011 Interim Tier 4/Stage III B emissions regulation mandated by the U. S. Environmental Protection Agency for diesel engines 174 horsepower and above. The company says the use of EGR will make compliance more operator friendly and less complex to maintain compared to selective catalytic reduction systems, which require liquid urea to achieve emissions compliance.
The National Institute for Occupational Safety and Health (NIOSH) developed new software to analyze and reduce hazardous noise exposure. The Determination of Sound Exposures software (DOSES) program is designed specifically for use by mine management and safety personnel to simplify recordkeeping and analysis associated with time-motion studies and to make it easier to identify and solve noise exposure problems. The DOSES software program is available on the NIOSH Mining Web site at www.cdc.gov/niosh/mining/products/ .
Energy-efficient dust control
Aerodyne, a division of Abanaki Corp., says its new Vacu-Valve Armadillo closed-construction airlock valve provides positive seal under hoppers, cyclones, and dust collectors. The company says it requires no controls, lubrication, power source, or maintenance, allowing it to operate for about one-sixth the cost of a rotary airlock valve. The Armadillo’s duckbill valve design allows free-flowing continuous discharge, automatically adjusting to the desired vacuum.
DBI-Sala says its Ultra-Lok RSQ SRL with Rescue is a first-of-its-kind self-retracting lifeline, offering dual-mode operation that provides both fall arrest and rescue/descent modes. In the fall arrest mode, a speed-sensing brake automatically stops the fall, reducing the forces exerted on the user to safe levels of 900 pounds or less. If a fall occurs while in the rescue/descent mode, the device will arrest the fall and automatically lower the worker safely to the ground or next level. A 50-foot lifeline provides the worker with mobility.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/october-2009-rollouts/
URLs in this post:
 Kerry Clines: mailto:email@example.com
 www.cdc.gov/niosh/mining/products/: http://www.cdc.gov/niosh/mining/products/
Copyright © 2009 Aggregates Manager. All rights reserved.