- Aggregates Manager - http://www.aggman.com -

Rockmore Announces MultiPoint – The Next Generation of Carbide Inserts for their Button Bits

Posted By cprewitt On July 8, 2009 @ 8:19 am In Aggregates Zone | No Comments

multipoint2Rockmore International, a global manufacturer of rock drilling tools, has developed a revolutionary new carbide insert design for their button bits, the MultiPoint.

In percussion drilling, penetration rates depend on efficient crack propagation. With a conventional hemispherical insert, there is a single tangent point striking the rock, resulting in the rapid development of wear flats. Rockmore’s exclusive new carbide insert design provides multiple strike points for more efficient rock fracture and longer insert life.

Extensive rock-drilling trials showed that Rockmore’s button bits with MultiPoint inserts last up to 20% longer than the standard hemispherical design, and increased penetration rates by 10%. Wear flats appeared slower and later in the insert life than with hemispherical inserts. Testing also revealed that the MultiPoint inserts provided smoother bit rotation and advancement.

With the new Rockmore MultiPoint design, there is better transfer of energy, imparting more effective rock fracture. Button wear is reduced and overall bit life enhanced in even the most abrasive and hardest rock conditions.

The MultiPoint design is currently available in 1/2″ to 3/4″ (12 – 19mm) diameter carbide inserts, in Rockmore’s DTH and top-hammer bits, 3.5″ to 10″ (89 – 254mm) diameter.

Rockmore International is a global manufacturer of rock-drilling tools, serving the mining, construction, and water-well sectors for more than 60 years.


Article printed from Aggregates Manager: http://www.aggman.com

URL to article: http://www.aggman.com/rockmore-announces-multipoint-%e2%80%93-the-next-generation-of-carbide-inserts-for-their-button-bits/

Copyright © 2009 Aggregates Manager. All rights reserved.