- Aggregates Manager - http://www.aggman.com -
Stop Slips and Falls
Posted By aggman On February 16, 2012 @ 2:04 pm In Articles,Departments,Safety Shares | No Comments
Train workers to use proper safety equipment and take proper preventive measures.
Compiled by Therese Dunphy, Editor-in-Chief
The accident: On June 30, 2000, a 33-year-old supervisor with two years of mining experience was fatally injured at a sand and gravel operation. He was adjusting the water feed into a log washer when he lost his balance and fell into the operating equipment.
The Mine Safety and Health Administration (MSHA) identified 20 topics that account for 75 percent of the fatalities that occurred in the mining industry between 2000 and 2008. It is developing modules for each of these topics through its Safety Targets Program. Beginning in this issue, Aggregates Manager will provide information on the 10 areas of focus within metal/non-metal mines, as well as best practices.
Slips and falls are one of the leading causes of accidents in the mining industry. In MSHA’s nine-year window, they accounted for 73 fatalities, with 52 related to the failure to properly tie-off or to tie-off in combination with other safety measures. In addition, there were 18,577 non-fatal days lost (NFDL) slip and fall accidents in the mining industry — an average of more than 2,100 accidents of this nature each year.
Fall hazards include not properly tying-off or improper use of fall protection equipment; lack of barriers, guardrails, and handrails; unsecured, inadequate, or obstructed travel ways and walk ways; and improper use of ladders, among others. Consider the following safety tips to help equipment operators, mechanics, and repair crews work safely.
• Always wear appropriate protective equipment, and avoid jewelry or loose clothing that can become caught in moving parts.
• Always follow safety rules and procedures.
• Always examine boarding ladders, steps, and guardrails during pre-operational checks.
• Always make sure equipment ladders, steps, and platforms are securely anchored and well maintained. They should be well lit and free of slipping hazards.
• Always report defective equipment so it can be removed from service and repaired.
• Always maintain three points of contact when climbing or descending a ladder.
• Never mount or dismount a moving machine.
• Never carry personal items or supplies when climbing or descending a ladder. Use a rope to lift or lower them.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/stop-slips-and-falls/
URLs in this post:
 Image: http://www.aggman.com/files/2012/02/safetyUntitled-1.jpg
 Image: http://www.aggman.com/files/2012/02/bridge-stoneUntitled-1.jpg
 Image: http://www.aggman.com/files/2012/02/we-careUntitled-1.jpg
Copyright © 2009 Aggregates Manager. All rights reserved.