- Aggregates Manager - http://www.aggman.com -
Three fatal flaws of OSHA’s proposed crystalline silica rule
Posted By Therese Dunphy On March 17, 2014 @ 3:01 pm In Aggregates Insider,Featured Articles,News | No Comments
In just a few weeks, the Occupational Safety and Health Administration (OSHA)  will conclude its public hearings on a proposed rule for crystalline silica exposure . A final rule could follow in short order, and could provide the basis for a future rulemaking from the Mine Safety and Health Administration (MSHA) .
OSHA claims that “the proposal is based on extensive review of scientific and technical evidence, consideration of current industry consensus standards, and outreach by OSHA to stakeholders, including public stakeholder meetings, conferences, and meetings with employer and employee organizations.”
While the goal of protecting workers is certainly an admirable one, OSHA’s proposal has numerous flaws that call its validity into question. And, since MSHA could likely its lead, it’s in the aggregate industry’s best interests to point out the shaky basis on which it was developed. Here’s an overview of some of the proposed rule’s flaws.
1) Sliced and diced data. Rather than using the most extensive and most recent studies available on the health impacts of silica (available through research conducted by the Crystalline Silica Panel), OSHA opted to use a 2004 NIOSH study to support its claims. Worse yet, it didn’t include the full study results when presenting the data. It cut off the highest exposure group (which included 30 deaths) to ensure the data supported the story it was trying to tell.
2) Creative math. The general rule of thumb for economic feasibility is that if a standard requires a company to spend more than 10 percent of its profit or 1 percent of its revenue, the standard is economically infeasible. To stay under that threshold, OSHA used 2006 as its benchmark. Oh, and it wasn’t a study of all companies in 2006, just the profitable ones. Does anyone think this economic analysis is representative of companies in today’s economy? Me neither.
3) Measurability. When performing its analysis, OSHA used its own laboratory, a single analyst and pure silica standards to demonstrate the threshold levels. Most labs are not able to accurately test for the standard, so they will have two years to meet quality control requirements. Operators, however, would be required to begin sampling immediately. Essentially, they would spend two years making decisions, recommendations and, potentially, investments based on potentially flawed analysis.
The bottom line is that OSHA’s rule is based on political interpretation of carefully sliced data that paints a skewed picture of the health impacts of exposure, underestimates the financial impact of compliance, and overestimates the access to technology needed for testing. This is a proposed rule that should not be finalized or used as the basis for future MSHA rulemaking.
Article printed from Aggregates Manager: http://www.aggman.com
URL to article: http://www.aggman.com/three-fatal-flaws-of-oshas-proposed-crystalline-silica-rule/
URLs in this post:
 Image: http://www.aggman.com/files/2014/03/shutterstock_125983712.jpg
 Occupational Safety and Health Administration (OSHA): https://www.osha.gov
 a proposed rule for crystalline silica exposure: http://www.aggman.com/crystalline-silica-exposure-take-time-and-get-it-right/
 Mine Safety and Health Administration (MSHA): http://www.msha.gov
 VIDEO: 1938 Labor Dept. video aims to prevent Silicosis: http://www.aggman.com/video-1938-labor-dept-video-aims-to-prevent-silicosis/
Copyright © 2009 Aggregates Manager. All rights reserved.