25 Days of RollOuts: Terex Washing Systems AggreSand

Therese Dunphy

December 27, 2013

PofW-4-8-Terex Aggresand

Terex Washing Systems’s AggreSand incorporates Terex washing systems in a modular design that is pre-wired and pre-plumbed to allow for quick and easy set-up, as well as ease of maintenance.

A 12-cubic-meter hopper is available with an automatic tipping grid and a 12-foot, two-deck vibrating grid com­plete with variable-speed belt feeder, all controlled from the main operator interface and radio control unit.

AggMan_25TopRollOutsA wide-feed conveyor sports a direct-drive electric motor and gearbox arrangement and will work at a 19-degree angle when feeding the system.

The three-deck, two-bearing rinsing screen has riveted construction to reduce stress associated with welds. Each deck has eight individually controlled spray bars, which are isolated from vibration.

A split sump tank receives rinsed fines from the bottom deck of the screen while two centrifugal slurry pumps move material from the sump tank into two hydrocyclones.

Underflow from the hydrocyclones goes to a dewatering screen fitted with two counter rotating vibratory motors.

The unit also has the option of three aggregate and two sand conveyors, which are pow­ered by direct-drive electric motors and gearbox arrangements.

Terex Washing Systems | terex.com

Editor’s note: We’re sharing all 2013 Top RollOuts throughout the month of December, with a different product posted each day. Click here to see them all.

There are no comments

Your email address will not be published. Required fields are marked *